LT-V Aluminum anti - mildew agent

LT-V Aluminum anti - mildew agent

Model：LT-V

Designation：Aluminum anti - mildew agent

Scope of application：The treatment of oxidation resistance and passivation on the surface of low silicon aluminum

Use equipment:316L tank, PVC chemical plastic tank

Usage: Dilute with water at a ratio of about 2%, and then put the passivated product into the working tank. According to the process requirements, control the soaking time, rinse, dry or air dry

The product helps enterprises solve the difficult problems, such as solving  the problem of oxidation during storage and transportation of products; and also the following problems

Main Technical Specification

Product Advantages:

➣ This product is easy to configure, easy to operate and easy to manage.

➣ This product and its aqueous solution are quite stable, non-toxic and harmless, and have little irritation to skin.

➣  Safe and environmental, easy to biodegrade.

➣ no corrosion of aluminum alloy, no blackening phenomenon

➣ It can be used repeatedly, saving energy and low comprehensive cost.

Notes:

➣ Avoid contact with children.

➣ After treatment must be cleaned, otherwise easy to form spots.

➣ Such as a small amount of leakage with cloth scrub, a large amount of leakage with sand absorption;

➣  Keep it sealed when not in use to avoid storage in cold conditions;

➣ In case of contact with skin, rinse immediately with plenty of water. In serious cases, seek medical advice immediately.

Packaging and storage:

25kg / bucket(plastic bucket) stored in shady place 

storage life:

Keep sealed for 3 years